Electronic drum connections · declared evidence
Will this drum pad deliver the zones you need?
Compare a pad’s declared trigger family, input mode, zone ceiling, choke/position support and approved lead. Connector fit alone is not compatibility.
Your declared setup
Two zones does not identify the wiring
Two piezos, a piezo plus a switch, and a manufacturer-specific analog arrangement can share a similar connector. Some three-zone pads use switching/resistor arrangements on one lead; other cymbals consume more than one input. Enter the mode the exact module manual supports, not a guess from TS/TRS or the number of zones.
Example: a two-zone request with a documented one-zone ceiling is a conflict, even when the head triggers. A three-zone declaration with unknown support remains unverified. An exact documented analog exception may bridge different descriptions; matching categories alone never establish the exception.
Choke and position are independent requirements
Working head and rim hits do not establish choke or position sensing. Select the behavior you actually need and check it for the precise pad, input, firmware and mode. The affirmative support field means all requested extras are documented, not merely that the product advertises a similar feature elsewhere.
This is an evidence preflight, not a model search or a prediction of playing feel. For a model-specific compatibility table start with the manufacturer; see the primary sources and exceptions. For foot opening positions use the separate hi-hat route planner.